dctcSection: User Commands (1)Updated: April 2002 |
NAME
dctc - Direct Connect Text ClientSYNOPSIS
dctc [options]DESCRIPTION
Text console client of well known DC (Direct Connect) protocol which offers peer-based file-sharing. In practise it works better than gnutella and other similar systems as it allows dc hubs (servers) administators to require clients to share specified amount of data. The amount is usually based on type of client's connection and it is used not to hurt or exclude anybody but to make file sharing "fair play".OPTIONS
- -h, --help
- Display this help
- -n, --nick=NICKNAME
- user nickname (default: 'Noname')
- -i, --info=INFO
- user description (default: none)
- -c, --cnx=CNX
- user connection type (default: 'Cable')
- -e, --email=EMAIL
- user e-mail (default: none)
- -d, --dlslot=NUM
- number of download slot (default: 3)
- -s, --share=DIR
- shared directory (default: none)
- -o, --offset=NUM
- add this value to size real size of shared data (default: 0)
- -a, --hostaddr=HOSTIP
- IP of the host running this client (mandatory if using active mode) (default: IP of the first network interface)
- -p, --port=PORT
- localhost port to accept incoming connection (only in active mode) (default: 412 (like Direct Connect)). Be careful, value below 1024 is only allowed to privileged users (root)
- -g, --hubip=HUBIP[:PORT]
- IP of the hub to connect to. If no port is given the default port (411) is used
- -f, --firewall
- enable passive mode because host is behind a firewall (default: not behind a firewall)
- -T, --tos=HUB,UDP,DL,UL
- TOS-Value to use on hub,udp,download,upload connections. Default values are 0.
-x, --no_xfer - Remote users cannot download (same as /DLOFF)
- -w, --when_done
- When download is done, move the file into done/ directory (same as /DONE).
- -t, --no_tty
- Detach from the tty used by the shell starting the program
- -l, --link
- Wait a connection on the unix socket before starting (only useful with a GUI)
- -v, --version=VERSION
- Force DC version. Modifying this number doesn't affect DCTC but it allows you to enter a hub refusing you just because you don't have the latest version of DC. This DCTC supports DC protocol version 1,0091
- -u, --upload=NUM1,NUM2,NUM3
- Bandwidth limit. NUM1 is the number of 512 bytes per second allowed to be sent NUM2 is the number of 512 bytes per second allowed to be received. NUM3 is the number of 8KBytes bloc per second that can be copied when client gathers GDLs parts. (default: unlimited [in fact, it is 16MB/s]) Note: this flag is only taken into account if this client creates the bandwidth limit semaphore, use /[UDG]BL to change the value later
- -b, --precmd=COMMAND
- perform the given command BEFORE connecting to the hub. Not all / commands can be used here, look at the command list to know which are. You can run more than one command by using --precmd for each one. When multiple --precmd are given, commands are performed in the given order.
- -5, --nomd5sum
- Do not compute MD5 sum for each shared file This sum is used for content search. Default: enabled
- -k, --dctclink
- some commands can be received from or send to other running dctc clients. This is useful to improve search and download efficiency.
- -S, --socksaddr=ADDR
- address (IP or name) of the SOCKS proxy to use Default: no SOCKS proxy is used
- -P, --socksport=NUM
- port of the SOCKS proxy. Default: 1080 Only used if -S used
- -U, --socksuid=STRING
- If the SOCKS proxy requires a userID, this is it Default: none
- -x, --socksv5
- Enable SOCKS v5 support. Default: if -S is used SOCKS protocol version 4 is used.
- -K, --sockspass=STRING
- If the SOCKS proxy requires a password, use this flag. Note: if this flag is used, you MUST also use -U to give a userID.
- -C, --connectproxy=ADDR[:PORT]
- address (IP or name) and port of a web proxy supporting the CONNECT command. The default port is 8080 if none is provided. This type of proxy allows passive mode connection only.
- -D, --virtual_share_dir=DIR
- Define a directory contains files describing virtually shared files. (see Docs/Vshare).
Be careful, most of the information you provide can't contain the following
characters because Direct Connect uses them internally: | $
AVAILABILITY
The latest version of dctc can be obtained online from:COPYRIGHT
Copyright © 1997-2002 Free Software Foundation, Inc.This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.