LVM

NAME

lvm - LVM2 tools

SYNOPSIS

lvm [command | file]

DESCRIPTION

lvm provides the command-line tools for LVM2. A separate manual page describes each command in detail.

If lvm is invoked with no arguments it presents a readline prompt (assuming it was compiled with readline support). LVM commands may be entered interactively at this prompt with readline facilities including history and command name and option completion. Refer to readline(3) for details.

If lvm is invoked with argv[0] set to the name of a specific LVM command (for example by using a hard or soft link) it acts as that command.

One advantage of using the built-in shell is that configuration information is cached internally between commands.

A file containing a simple script with one command per line can also be given on the command line. The script can also be executed directly if the first line is #! followed by the absolute path of lvm.

Where commands take VG or LV names as arguments, the full path name is optional. An LV called "lvol0" in a VG called "vg0" can be specified as "vg0/lvol0". If a list of VGs is required but is left empty, a list of all VGs will be substituted. If a list of LVs is required but a VG is given, a list of all the LVs in that VG will be substituted. So "lvdisplay vg0" will display all the LVs in "vg0".

OPTIONS

The following options are available for many of the commands and are not documented on individual manual pages.

-h | --help --- Display the help text.
--version --- Display version information.
-v | --verbose --- Set verbose level.: Repeat from 1 to 3 times to increase the detail of messages sent to stdout and stderr. Overrides config file setting.
-d | --debug --- Set debug level.: Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). Overrides config file setting.
--quiet --- Suppress output and log messages.: Overrides -d and -v.
-t | --test --- Run in test mode.: Commands will not update metadata.
--driverloaded { y | n }: Whether or not the device-mapper kernel driver is loaded. If you set this to n, no attempt will be made to contact the driver.
-A | --autobackup { y | n }: Whether or not to metadata should be backed up automatically after a change. You are strongly advised not to disable this! See vgcfgbackup (8).
-P | --partial: When set, the tools will do their best to provide access to volume groups that are only partially available. Where part of a logical volume is missing, /dev/ioerror will be substituted, and you could use dmsetup (8) to set this up to return I/O errors when accessed, or create it as a large block device of nulls. Metadata may not be changed with this option. To insert a replacement physical volume of the same or large size use pvcreate -u to set the uuid to match the original followed by vgcfgrestore (8).
-M | --metadatatype type: Specifies which type of on-disk metadata to use, such as lvm1 or lvm2, which can be abbreviated to 1 or 2 respectively. The default (lvm2) can be changed by setting format in the global section of the config file.
--ignorelockingfailure: This lets you proceed with read-only metadata operations such as lvchange -ay and vgchange -ay even if the locking module fails. One use for this is in a system init script if the lock directory is mounted read-only when the script runs.
--addtag tag: Add the tag tag to a PV, VG or LV. A tag is a word that can be used to group LVM2 objects of the same type together. Tags can be given on the command line in place of PV, VG or LV arguments. Tags should be prefixed with @ to avoid ambiguity. Each tag is expanded by replacing it with all objects possessing that tag which are of the type expected by its position on the command line. PVs can only possess tags while they are part of a Volume Group: PV tags are discarded if the PV is removed from the VG. As an example, you could tag some LVs as database and others as userdata and then activate the database ones with lvchange -ay @database. Objects can possess multiple tags simultaneously. Only the new LVM2 metadata format supports tagging: objects using the LVM1 metadata format cannot be tagged because the on-disk format does not support it. Snapshots cannot be tagged. Characters allowed in tags are: A-Z a-z 0-9 _ + . -
--deltag tag: Delete the tag tag from a PV, VG or LV, if it's present.

ENVIRONMENT VARIABLES

LVM_SYSTEM_DIR: Directory containing lvm.conf and other LVM system files. Defaults to "/etc/lvm".
HOME: Directory containing .lvm_history if the internal readline shell is invoked.
LVM_VG_NAME: The volume group name that is assumed for any reference to a logical volume that doesn't specify a path. Not set by default.

DIAGNOSTICS

All tools return a status code of zero on success or non-zero on failure.

FILES

/etc/lvm/lvm.conf
$HOME/.lvm_history

LVM